หืมม ไข่จะๆ
Human egg makes accidental debut on camera in time of laparoscopic hysterectomy
Moment of ovulation photographed during a laparoscopic hysterectomy.
Ovulation is the release of an egg from one of a woman's ovaries. After the egg is released, it travels down the fallopian tube, where fertilization by a sperm cell may occur. Ovulation typically lasts one day and occurs in the middle of a woman's menstrual cycle, about two weeks before she expects to get her period. The release of an egg was considered a sudden, explosive event, but these pictures show it taking place over a time of at least 15 minutes. Follicles are usually sized 12–19 mm, intact healthy oocytes with corona cells obtained from small (3-4 mm diameter), medium (5-8 mm diameter) and large (9-15 mm diameter). Human life begins at fertilization (the egg is not the beginning of life - this cell contains only half the necessary genetic information): human development begins after the union of male and female gametes or germ cells during a process known as fertilization (conception). This is the scientific definition of human development.
Laparoscopy is an operation performed in the abdomen or pelvis using small incisions (usually 0.5–1.5 cm) with the aid of a camera, the commonest diameter for laparoscopic instruments is 5 mm,
A hysterectomy is surgery to remove a woman's uterus or womb. The uterus is the place where a baby grows when a woman is pregnant. After a hysterectomy, you no longer have menstrual periods and can't become pregnant. Sometimes the surgery also removes the ovaries and fallopian tubes.
Source: http://www.newscientist.com/…/mg19826604.200-human-egg-make…
同時也有5部Youtube影片,追蹤數超過46萬的網紅hiro hiro,也在其Youtube影片中提到,材料 12cmバネ口金を使用する場合 本体 14cm×14cm(表生地、内生地、接着芯、2枚ずつ) 口布部分 13.5cm×5cm(表生地、接着芯、2枚ずつ) 15cmバネ口金を使用する場合 本体 17cm×17cm(表生地、内生地、接着芯、2枚ずつ) 口布部分 16.5cm×5cm(表生地、接着...
「1.5 cm to mm」的推薦目錄:
- 關於1.5 cm to mm 在 Hobbyslam Facebook 的最佳解答
- 關於1.5 cm to mm 在 M&K Kamera Cameras & Equipment 齊齊影攝影器材 Facebook 的最佳解答
- 關於1.5 cm to mm 在 hiro hiro Youtube 的精選貼文
- 關於1.5 cm to mm 在 hiro hiro Youtube 的最佳解答
- 關於1.5 cm to mm 在 MosoGourmet 妄想グルメ Youtube 的精選貼文
- 關於1.5 cm to mm 在 How to Read a Metric Ruler - YouTube 的評價
1.5 cm to mm 在 M&K Kamera Cameras & Equipment 齊齊影攝影器材 Facebook 的最佳解答
Voigtlander 50/1.5 50mm f/1.5 Chrome Silver Nokton Aspherical Japan for Leica-M M-E Monochrom NEX M4/3
P#T77364 $6680
**Item condition and details**
It is in Brand New condition.
The new Voigtländer Nokton 50mm f/1.5 Aspherical VM is the improved edition of a classic M-mount rangefinder camera lens. Described as an “inexpensive” alternative to the faster Nokton 50mm f/1.1 VM, the improved Voigtländer Nokton 50mm f/1.5 Aspherical is constructed of 6 elements in 5 groups and comes equipped with a 10-bladed iris diaphragm. The closest focusing distance is 70cm, a 20cm improvement over the lens’ predecessor. Available in black and silver, the new Voigtländer Nokton 50mm f/1.5 Aspherical VM lens takes small 49mm filters. The exact launch date and pricing have yet to be confirmed.
The black Nokton 50mm f/1.5 Aspherical Lens from Voigtlander is a standard focal length manual focus prime lens for M-mount rangefinder cameras. For all other camera mounts, a specific adapter is needed. It is a compact (1.8") lens with an all-metal lens barrel and a particularly fast aperture--effective in low light situations and able to create shallow depth of field. Distance and depth of field scales are clearly marked on the lens barrel.
~~~
Focal Length 50mm
Aperture Range f/1.5-16
Mount VM
Format Full Frame/35mm
Minimum Focus Distance 27.6"" (70 cm)
Angle of View 46°
Lens Construction 6 elements in 5 groups
Diaphragm Blades 10
Filter Size 49mm
Dimensions 2.1 x 1.8"" (53.8 x 45.7 mm)
Weight 7.8 oz (220 g) "
Made in Japan
Including
- Hood
- Front and Rear Caps
- Papers
- Box and packing
1.5 cm to mm 在 hiro hiro Youtube 的精選貼文
材料
12cmバネ口金を使用する場合
本体 14cm×14cm(表生地、内生地、接着芯、2枚ずつ)
口布部分 13.5cm×5cm(表生地、接着芯、2枚ずつ)
15cmバネ口金を使用する場合
本体 17cm×17cm(表生地、内生地、接着芯、2枚ずつ)
口布部分 16.5cm×5cm(表生地、接着芯、2枚ずつ)
接着芯(ダイソー)
バネ口金(12cmセリア)か(15cm手芸店)
持ち手(セリアorダイソー)
アルミ針金 約1.5mm幅(セリア)
道具
ペンチ
10cm の口金を使用する場合はこちらの動画をご覧ください。
https://youtu.be/zUfAhpt9N9U
バネ口金を使って三角ポーチを作りました^^
良かった作ってみて下さい!
material
When using a 12 cm base
Body 14 cm x 14 cm (outer fabric, inner fabric, interlining, 2 sheets each)
Mouth cloth part 13.5 cm x 5 cm (outer cloth, interlining, 2 sheets each)
When using a 15 cm base
Body 17 cm x 17 cm (outer fabric, inner fabric, interlining, 2 sheets each)
Mouth cloth part 16.5 cm x 5 cm (outer cloth, interlining, 2 sheets each)
Interlining
internal flex frame (12 cm or 15cm)
handle
Aluminum wire about 1.5 mm wide
tool
pliers
I made a triangular pouch using a internal flex frame.
Please try to make it good!
テトラ
1.5 cm to mm 在 hiro hiro Youtube 的最佳解答
完成サイズ 横12cm×縦13cm マチ2cm
材料
本体 14cm×14cm(表生地、内生地、接着芯、2枚ずつ)
口布部分 13.5cm×5cm(表生地、接着芯、2枚ずつ)
接着芯(ダイソー)
バネ口金(12cm)セリア
持ち手(セリア)
アルミ針金 約1.5mm幅(セリア)
道具
ペンチ
取り外しが出来る持ち手付きなので
バッグに取り付けたり便利にお使いいただけると思います。
良かったら作ってみて下さい!
Completed size 12 cm wide x 13 cm long gusset 2 cm
material
Body 14 cm x 14 cm (outer fabric, inner fabric, fusible interlining, 2 sheets each)
Mouth cloth part 13.5 cm x 5 cm (outer cloth, fusible interlining, 2 sheets each)
fusible interlining
internal flex frame (12 cm)
handle
Aluminum wire about 1.5 mm wide
tool
pliers
With a removable handle.
I think you can attach it to your bag or use it conveniently.
Please make it if you like!
1.5 cm to mm 在 MosoGourmet 妄想グルメ Youtube 的精選貼文
まさかこんなにハマるとは思っていなかったアニメ「鬼滅の刃」。決定的だったのは第19話「ヒノカミ」の「竈門炭治郎の歌」をバックにしたアニメーション!禰豆子の「血鬼術 爆血!」は最終回かと思うくらいのクライマックスでした!炭治郎がお父さんから「必ず途切れさせず継承していってくれ」「約束なんだ」と言われた耳飾り。僭越ながら作ってみました。
「俺と禰豆子の絆は誰にも、引き裂けない!」
(クッキングシート使用上の注意 https://www.lion.co.jp/ja/products/246 )
*レシピ*
1.プラバンの裏を400番のヤスリ(ダイソー)でくるくると全面ヤスル。
2.全体が白くなったらウエットティッシュなどでゴミを落とす。
3.プラバンが乾いたら、ヤスリをかけた面に鉛筆で型紙を写し取る。
4.色鉛筆で着色する。
5.ハサミで枠のほんの少し内側を切る。
6.2分ほど予熱したオーブントースターで焼く。オーブンシートにのせ、オーブントースターに入れると数秒で縮んでくるので目を離さないこと。(クッキングシート使用上の注意 https://www.lion.co.jp/ja/products/246 )縮むのが止まったら一呼吸おいてオーブンシートごと取り出す。今回、縦長のデザインなので焼いている途中でひっくり返しになることが多かった。着色面(裏)を上にして焼き、ひっくり返って最終的に着色してない面(表)が上になるようにしました。10センチ以上の大きさのプラバンを焼くのは難しいようです。
7.熱に強い、固く平らな物の上に置き、金属のバットなどでプレスする。熱いので気をつけて!
8.冷めたら、色落ちを防ぐために水性トップコートスプレー(Mr.hobbyの つや消し)を裏面(色鉛筆面)にスプレーする。
9.1.5ミリのハンドドリル(キャンドゥ)やピンバイスで穴を空ける。
10.手芸店(ユザワヤ)で買ったイヤリングパーツとプラバンを9ピンで繋ぎました。ラジオペンチや指かん(ダイソー)も100円ショップで買うことができます。
11.でけた。
作る前にやっておくこと
1.プラバン(キャンドゥ)は5センチ四方に切り、板の方向を書き込んで試し焼きをする。板によって縦横の縮み方、反り方が異なるので、その板の性格を知っておくと便利です。
2.プラバンの縦横の方向と表裏が、わかるようにマスキングテープなどで印を付ける。
3.プラバンを切る。いくつか作る場合はデザインの縦横を同じ方向にする。プラバンの縮み方が揃ってきれいに仕上がる。
We never thought that the animated series "Demon Slayer: Kimetsu no Yaiba" would be so addictive!
The decisive moment was in episode 19, "Hinokami", the animation with "The song of Tanjiro Kamado" in the background!
Nezuko's " Blood Art - Exploding Blood" was a climax was worthy of being the final episode.
The earrings Tanjiro inherited from his father, saying, "Please let them pass on interrupted" with him replying "I promise." We audaciously tried to make them ourselves!
"I will let nobody break the bond between Nezuko and I!"
*Recipe*
1. File down around the back of the plastic base with a number 400 file (sold at Daiso).
2. Use a wet tissue to remove dirt etc. when the plastic base becomes white.
4. When the plastic base has dried, use a pencil to trace onto pattern paper the face that was filed down.
5. Use scissors to cut a little into the frame.
6. Bake for about two minutes in a pre-heated oven toaster. Place on an oven sheet and do not let out of your sight as it will start to shrink in a few seconds. Once it stops shrinking, take one breath and remove from the oven, oven sheet and all. This time since the design was lengthwise, there were many times when it flipped over when being baked. We decided to put the colored face (the back) face up and bake, flipping it over so that in the end, the face without color (the front) ends up on top.
It seems to be difficult to bake a plastic base that is over 10 cm.
7. Place on a hard, flat, heat-proof surface and press down with something like a metal plate. It's hot, so be careful.
8. Once it has cooled, spray the reverse side (the side that is marked with colored pencils) with topcoat spray (Mr. hobby's anti-gloss spray) to prevent discoloration.
9. Use a 1.5 mm hand drill (sold at Can-do) or a pin vice to create holes.
10. We connected the plastic base with an earring set bought at a craft shop (Yuzawaya). You can buy radio pliers or jump ring closing tools (Daiso) at 100 yen shops.
11. All done.
Preparation:
1. Cut the plastic base (Can-do) into 5 cm squares and create markings in the direction of the base, then do some trial baking. According to the base, the way that it will shrink length-wise and width-wise will differ, so it is convenient to understand the characteristics of the base.
2. Use masking tape to indicate the frontside and backside of the plastic base.
3. Cut the plastic base. If you are making several at once, make sure to cut them in the same size length and width-wise. This will ensure that the plastic base will shrink in the same way when heated and turn out nicely.
#KimetsunoYaiba #鬼滅の刃 #DIY #craft #DemonSlayer #ASMR
1.5 cm to mm 在 How to Read a Metric Ruler - YouTube 的推薦與評價
... <看更多>