#國際新知 #CPU使用率 #Arduino
Ctrl+Alt+Del 叫「工作管理員」出來面對,看現在 CPU 使用量到底是多少~~ 只用 LED 的話,50% 亮度跟 100% 亮度都是亮,那是要怎麼分辨啦?
沒關係,精確數值如何?怎麼做到?寫一個可以接上三用電錶測量電壓,測出來的電壓越高,微處理器負載越高.......有沒有很聰明?
#三用電錶
vMaker 台灣自造者
About author
vMaker 台灣自造者為勞動部勞動力發展署委託MakerPRO營運之網站,志在建立一個能夠提供自造者(maker)們互相交流技術、展示、討論的場域,一方面針對國內自造者的需求提供服務,一方面積極延伸社群範圍,使「Do It With Others(DIWO)」的手作精神更為普及。
vMaker 希望讓擁有 DIY 想法的人們可以獲得更多的技術資訊,自造者可以在這裡發表個人作品,可以在這裡提出構思,最重要的,這是一個屬於自造者的社群,大家能夠在平台上交換意見與技術訊息,透過社群力量,自造者文化便由「DIY」進一步延伸成「DIWO」,讓自造者文化真正扎根。
「創意」、「創造」、「分享」,vMaker 企圖整合並解決這三個 DIWO 過程中可能遇到的困難;當然這並非一蹴可及,社群的成長與維繫正如同一個手作的過程,需要勇敢的嘗試、創意加上親身投入的覺悟,如果您有任何對 vMaker 的建議,十分歡迎與我們聯絡!
【vMaker粉絲頁和 Makerdiwo 創客窩粉絲頁已合併營運】
The vMaker website is part of the PanSci network commissioned by the Workforce Development Agency, Ministry of Labor, to establish a platform where makers can share, showcase, and discuss technology. The platform provides services to meet Taiwanese makers various needs and at the same time actively work to expand the community, spreading the idea of Do It With Others (DIWO).
vMaker aims to provide people who want to DIY with all the technical information they need. Makers are free to publish their work and propose new ideas here, because, after all, this community belongs to makers. On this platform, everybody is allowed to express their opinion and share technical information. With the power of community, maker culture will make the switch from DIY to DIWO, enabling a wider maker culture to take root.
Creativity, creation and sharing, are the three sources of potential difficulty in the DIWO process. vMaker is trying to integrate makers and overcome these difficulties, but it’s not going to happen overnight. Just like doing any handicraft, growing and maintaining a community requires courage, creativity and commitment. If you have any suggestions for vMaker, feel free to contact us!
提供科技新知、生活手做和募資專案等不同面向的創客/自造者(Maker)活動及資訊,創造多面的互動場域。
提供科技新知、生活手做和募資專案等不同面向的創客/自造者(Maker)活動及資訊,創造多面的互動場域。
arduino微處理器 在 [請益] 請問微處理器的知識- 看板Soft_Job - 批踢踢實業坊 的推薦與評價
大家好
最近有在練習一些微處理器 一些板子
就是買 Arduino來玩玩 控制一些小東西
我自己是有拿Arduino來控制實驗室的高級步進馬達
寫PWM等等
再使用c#寫一些介面去控制晶片
也在過年自己弄了一台藍芽電動遙控車
不過聽說業界也很少用Arduino
計算效率太慢而且授權問題(?)
比較多的還是用arm or 51家族
針對暫存器角度去寫
有可能用Keil或是直接用linux tool
加上我之後想拿arm晶片來做一些訊號處理 或是玩玩RTOS
我自己原本是直接看arm
但是後來覺得好像有點越級打怪XDD
不知道先寫51用c 和assembly練過
再去學ARM比較好嗎?
因為大學非相關
蠻多部分都不太熟 需要重念計算機結構跟作業系統嗎?
這兩本念下來真的蠻吃力的
另外用keil真的不太好嗎?
jserv老師的課程都是用Linux多
個人都蠻喜歡用IDE的..
謝謝各位先進
--
※ 發信站: 批踢踢實業坊(ptt.cc), 來自: 114.136.1.76
※ 文章網址: https://www.ptt.cc/bbs/Soft_Job/M.1455366314.A.BC8.html
因為我主要是做訊號處理的 之前都沒碰過這些
※ 編輯: s77485p (111.240.20.43), 02/13/2016 23:35:14
※ 編輯: s77485p (111.240.20.43), 02/13/2016 23:35:26
... <看更多>