台灣的政策目標是山域、水域全面開放(來源法務部公告),所以目前執行上,山域開放了,國家賠償法也修正了,自然公物不負賠償責任(來源法務部),不過在水域上,釣魚上,其實還是很封閉,原因如下:
法規上:發展觀光條例36條給予地方政府限制水域的權力,同法60條給予罰款的權力。
情理上:為了避免有人死傷控告政府管理不當。
利益上:為了保障部分淡水河域船隻的觀光利益,保障海上漁民、娛樂船的利益。
所以水域跟山域的差距,應該只有利益上的差距,所以我目前解讀成因為漁民與觀光的利益衝突,政府選擇漁民與觀光船。
所以利用的法規上的優勢,持續封閉。
而最近新北市政府利用不正確的法規來限制水域浮具釣魚的活動,但是法規上並沒有這樣的法條依據。
我其實前幾年剛開始玩獨木舟的原因,就是看到日本Youtube影片,划的獨木舟,出去釣魚,然後到岸邊搭營,烤一尾自己釣的魚,但是當我開始瞭解法規之後,我就不敢再維持這一個夢想,因為才知道台灣法規上的限制。
山海永遠都在,人很渺小,永遠都會發生意外,所以才需要在教育上學習與山海共存。
登山會摔死,為何挖礦不用禁止,因為利益。
出海會溺斃,為何捕魚不用禁止,因為利益。
每種政策下,一定會有不同的受益者,透過受益者的多寡來決定政策,這是民主的一部份,不過這是目前的利益,還是長期的利益,這是大家需要思考的,荷包上的豐盈,還是精神富足與身體強健,就看大家如何取捨。
賺錢養家是必須的,運動遊憩調劑身心也是現代人必須的,就算利益歸利益,
台灣運動用品業產值:2018年470億台幣(來源 經濟部統計處,製造業的出口、內需),雖然無法查詢到台灣內需戶外產業的產值,但是可以用此想像如果台灣如歐美等國家開放,將有多大的成長空間,利益上來說,還是應該要開放。
目前 還我親水權--台灣開放水域聯盟(開水聯盟) 正在透過FB連署,透過這連署來跟政府請願,廢除發展觀光條例36、60條,也就是台灣封閉水域的主要法源,如果你支持,請在這邊點選"參加",透過統計的數量,可以提高政府的重視程度。
https://www.facebook.com/events/2618852895075081?ref=newsfeed
---參考資料----
發展觀光條例
第 36 條
為維護遊客安全,水域遊憩活動管理機關得對水域遊憩活動之種類、範圍、時間及行為限制之,並得視水域環境及資源條件之狀況,公告禁止水域遊憩活動區域;其禁止、限制、保險及應遵守事項之管理辦法,由主管機關會商有關機關定之。
第 60 條
於公告禁止區域從事水域遊憩活動或不遵守水域遊憩活動管理機關對有關水域遊憩活動所為種類、範圍、時間及行為之限制命令者,由其水域遊憩活動管理機關處新臺幣一萬元以上五萬元以下罰鍰,並禁止其活動。前項行為具營利性質者,處新臺幣三萬元以上十五萬元以下罰鍰,並禁止其活動。具營利性質者未依主管機關所定保險金額,投保責任保險或傷害保險者,處新臺幣三萬元以上十五萬元以下罰鍰,並禁止其活動。
https://law.moj.gov.tw/LawClass/LawAll.aspx?pcode=K0110001
水域遊憩活動管理辦法
第 3 條
本辦法所稱水域遊憩活動,指在水域從事下列活動:
一、游泳、衝浪、潛水。
二、操作乘騎風浪板、滑水板、拖曳傘、水上摩托車、獨木舟、泛舟艇、香蕉船、橡皮艇、拖曳浮胎、水上腳踏車、手划船、風箏衝浪、立式划槳等各類器具之活動。
三、其他經主管機關公告之水域遊憩活動。
https://law.moj.gov.tw/LawClass/LawAll.aspx?pcode=k0110024
立法院於 108 年 12 月 3 日三讀通過之 國家賠償法修正條文
https://www.moj.gov.tw/2204/2795/2796/37844/post
新北市政府公告
https://tour.ntpc.gov.tw/zh-tw/ContentPage/List?wnd_id=37&type=26&fbclid=IwAR27lgo_kvpMflpElZJP9CyAfK-w6v4mln5afd_fsJnc7_tXUxiqn-WKpc0
新聞報導:新北不撤禁止浮具釣魚公告 交部:牴觸中央法令失效
https://udn.com/news/story/121972/5221645
經濟部統計處:
https://www.moea.gov.tw/mns/dos/bulletin/Bulletin.aspx?kind=9&html=1&menu_id=18808&bull_id=6233
同時也有224部Youtube影片,追蹤數超過438萬的網紅ヒカル(Hikaru),也在其Youtube影片中提到,■ReZARD beauty公式HP 定期(サブスクリプション)でのご購入はこちら https://rezard.jp/beauty/ ■@cosme SHOPPING でのご購入はこちら https://www.cosme.com/campaign/group/2268/ ■楽天でのご購入はこ...
「html list type」的推薦目錄:
- 關於html list type 在 Campfire 營火部落 Facebook 的最讚貼文
- 關於html list type 在 Facebook 的最讚貼文
- 關於html list type 在 Becca en el mundo //我的斜槓人生// Facebook 的最佳貼文
- 關於html list type 在 ヒカル(Hikaru) Youtube 的最讚貼文
- 關於html list type 在 ヒカル(Hikaru) Youtube 的最讚貼文
- 關於html list type 在 ヒカル(Hikaru) Youtube 的最佳解答
- 關於html list type 在 CSS Tutorial 65 - CSS list-style-type Property | HTML ul tag 的評價
- 關於html list type 在 Proper way to make HTML nested list? - Stack Overflow 的評價
- 關於html list type 在 YouTube Embedded Players and Player Parameters - Google ... 的評價
html list type 在 Facebook 的最讚貼文
เยอรมนีแก้ไขปัญหาการขาดแคลนเตียงได้อย่างไร?
อย่างที่เราทราบกันว่าหลายประเทศในยุโรป และแม้แต่เยอรมนีเองก็ตามที่ถือว่าเป็นประเทศที่มี Intensive Bed เยอะเป็นอันดับต้นๆ ของโลก ก็เคยประสบปัญหาการขาดแคลนเตียงที่ใช้ในต่อสู้กับไวรัสเช่นเดียวกัน
แต่!! ณ ตอนนี้ที่เรียกได้ว่าสถานการณ์ดีขึ้นมามาก ทั้งในแง่ของผู้ติดเชื้อที่น้อยลงอย่างมีนัยสำคัญ และจำนวนผู้รักษาหาย
จนในหลายครั้งที่เยอรมนีนั้นรับผู้ป่วยอาการหนักจากประเทศข้างเคียงที่ขาดแคลนเตียงเข้ามาช่วยรักษาเป็นระยะๆ ซึ่งเป็นสิ่งที่น่าสนใจมากๆว่า
"เค้าผ่านปัญหา ณ ตอนนั้นมาได้อย่างไร?"
มาครับ พ่อบ้านจะเล่าให้ฟัง
1. จัดลำดับความสำคัญและกักตัวที่บ้าน
สำหรับผู้ป่วยติดเชื้อที่แข็งแรง, ไม่มีอาการใดๆ หรืออาการน้อย ทางการเยอรมันจะให้ทำการกักตัวที่บ้าน และเมื่ออาการหนักก็สามารถเรียกรถพยาบาลหรือโทรปรึกษาหมอได้ หรือเรียกได้ว่าทางคุณหมอจะทำการจัดลำดับความสำคัญของผู้ที่จะได้รับเตียงหรือเข้าพักในโรงพยาบาล
ซึ่งระบบนี้ก็จะช่วยทำให้โรงพยาบาลของเยอรมันนั้นจะได้ใช้เตียงสำหรับคนที่มีความต้องการใช้จริงๆ เท่านั้น แต่อย่างไรก็ตามการที่จะใช้ระบบนี้จะต้อง
- มีบทลงโทษที่หนักสำหรับคนฝ่าฝืน
- มีการสุ่มตรวจ และตรวจสอบของเจ้าหน้าที่ (ที่เยอรมันจะมีการสุ่มโทรเข้าเบอร์บ้าน หรือโผล่มาดูที่หน้าบ้านเลย ถ้าคุณไม่อยู่บ้านชีวิตเปลี่ยนแน่ครับ)
- ผู้ที่กักตัวจะต้องมีวินัยในระดับนึง
และถ้าถามว่าถ้าถูกกักตัวในบ้านแล้วจะซื้อของกินของใช้อย่างไร คำตอบก็คือให้ญาติหรือคนรู้จักช่วย แต่ถ้าเกิดไม่มีทางเยอรมันจะมีการรวมตัวกันของอาสาสมัครเพื่อสังคมหรือเจ้าหน้าที่มาช่วยซื้อของให้นั่นเอง
2. สำรองเตียงทำหรับผู้ป่วยติดเชื้ออาการหนักโดยเฉพาะ
อัตราการสำรองเตียงและเครื่องช่วยหายใจสำหรับผู้ป่วยติดเชื้อที่อาการหนักของโรงพยาบาลที่เยอรมันนั้น จะอยู่ที่ ประมาณ 25 - 30% โดยจะขึ้นอยู่กับแต่ละโรงพยาบาลบริหาร
แต่ก็มีหลายช่วงที่อัตราการสำรองเตียงนั้นลดลงมาอยู่ที่ 10% หรือบางครั้งก็ต่ำกว่า แต่อย่างไรก็ตามทางเยอรมนีก็พยายามที่จะรักษาระดับให้พอมีจำนวนเตียงรับมือให้ได้อยู่เสมอ
3. เร่งสั่งผลิตอย่างต่อเนื่องตั้งแต่สถานการณ์ยังไม่หนัก
ถึงแม้ว่าทางเยอรมนีนั้นจะเป็นประเทศที่มีจำนวน Intensive Bed เมื่อเทียบกับจำนวนประชากร 100,000 รายแล้วจะมีจำนวนสูงสูงมากด้วยจำนวนประมาณ 28,000 เตียง หรือ 33.9 เตียงต่อประชากร 100,000 ราย
แต่ทางการเยอรมันได้ทำการคาดการณ์ไว้ในเบื้องต้นว่าด้วยจำนวนนั้นอาจจะไม่สามารถรับมือจำนวนผู้ป่วยได้ไหว จึงทำการสั่งผลิตและสั่งซื้อ จนทำให้ภายในระยะเวลาไม่กี่เดือนทางเยอรมันสามารถเพิ่มจำนวนเตียงจาก 28,000 เตียงกลายเป็น มากกว่า 40,000 เตียง เรียกได้เลยว่าผลิตเกินความต้องการไว้ก่อนเลยเพราะถือว่าเกินดีกว่าขาด (ขนาดผลิตมาเยอะแต่ก็มีบางช่วงขาดแคลนนะครับ) จึงทำให้พอมีจำนวนเตียงในการรับมือในช่วงของการแพร่ระบาดหนักๆ ได้
4. ใช้ Technology ให้เป็นประโยชน์
จากการแพร่ระบาดนั้นได้ส่งผลให้คนต้องอยู่กับบ้านมากขึ้น ซึ่งเยอรมันเองก็เข้าใจในจุดนี้จึงมีการประชาสัมพันธ์สายด่วนและเพิ่มจำนวนเจ้าหน้าที่ให้มากขึ้น
ซึ่งสายด่วนเหล่านั้นไม่ใช่มีแค่ในเรื่องของการติดเชื้อเท่านั้น หากแต่ว่ายังมีในเรื่องของปัญหาในครอบครัวหรือปัญหาสุขภาพจิต และอื่นๆ ที่มันจะเกิดปัญหาขึ้นได้จากการที่ต้องอยู่กับบ้าน
และนอกจากนี้ทางเยอรมันยังมีการจัดทำ App หรือ Website อย่างเช่น CovApp มาให้เพื่อตอบแบบสอบถาม และคัดกรองในเบื้องต้นว่าอาการแบบนี้ควรไปหาหมอหรือไม่ และรวมไปถึง Telemedicine ที่ทำให้คุณสามารถพบคุณหมอทางออนไลน์ได้
5. ตรวจให้หนัก ตรวจให้เยอะ เพื่อจำกัดวงการระบาด
อัตราการตรวจเชื้อของเยอรมันต่อวันต่อประชากร 1,000 คนนั้นถือว่าค่อนข้างสูงเลยทีเดียว โดยบางวันนั้นสูงถึง 700 กว่าครั้ง ต่อประชากร 1,000 คนเลยทีเดียว และมีหลายครั้งที่ยอดการตรวจต่อวันที่เยอรมันนั้นสูงกว่าหนึ่งล้านครั้ง
ซึ่งการตรวจเชื้อเยอรมันนั้นถือว่ามีสถานที่ตรวจเยอะมาก ไม่ว่าจะเป็นในศูนย์การตรวจที่ตั้งขึ้นมาโดยเฉพาะ, คลีนิกคุณหมอ หรือในปัจจุบันก็มีบริการตรวจให้ในบริเวณต่างๆ อาทิเช่นหน้าซุปเปอร์มาร์เก็ต ใจกลางเมือง หรือจุดที่มีคนพลุกพล่าน
ซึ่งพ่อบ้านมองว่าการที่ตรวจเยอะ เราก็จะเจอเยอะ ซึ่งมันจะช่วยเราจำกัดวงการแพร่ระบาดได้เร็วขึ้น และอาจจะช่วยให้ไม่ไปติดคนที่เป็นกลุ่มเสี่ยงที่ถ้าเค้าติดแล้วมีโอกาสที่จะต้องใช้เตียงสูงได้ครับ
"สำหรับเยอรมนีนั้นเรื่องเตียงหรือเรื่องอุปกรณ์อาจจะเป็นปัญหาค่อนข้างน้อยเพราะยังถือว่ามีจำนวนมาก และค่อนข้างทันสมัย แต่ปัญหาที่หนักจริงๆ ของเยอรมันก็คือการขาดแคลนบุคลากรทางการแพทย์ ที่หลายคนทำงานหนักเกิดขีดจำกัดของตัวเอง, บางคนสู้จนแทบไม่มีเวลาให้ครอบครัว, หรือบางคนก็ล้มป่วยก็มีไม่น้อย"
"ถึงในช่วงที่ผ่านมารัฐบาลเยอรมันจะมีโบนัสพิเศษให้บุคลากรทางการแพทย์บ้าง แต่ถ้าเทียบกับสิ่งที่พวกคุณทำนั้นมันอาจจะดูน้อยไปเลย พ่อบ้านต้องขอขอบคุณจริงๆ ที่ยืนหยัด และช่วยพวกเราฝ่าวิกฤตในครั้งนี้"
ขอแสดงความเคารพจากใจจริง
พ่อบ้านเยอรมัน
#พ่อบ้านเยอรมัน #เยอรมัน #เยอรมนี #Germany #German
ที่มาของข้อมูลในบทความ:
https://www.dw.com/en/covid-icu-bed-shortage-in-germany-is-imminent-doctors-warn/a-57150437
https://www.covid19healthsystem.org/countries/germany/livinghit.aspx?Section=3.1%20Planning%20services&Type=Section
https://ourworldindata.org/grapher/full-list-cumulative-total-tests-per-thousand?country=DEU~THA
https://www.dw.com/en/coronavirus-digest-germany-icu-capacity-at-critical-level/a-55912261
https://www.destatis.de/EN/Press/2020/10/PE20_N064_231.html
https://www.ft.com/content/d979c0e9-4806-4852-a49a-bbffa9cecfe6
https://covapp.charite.de/
https://www.covid19center.de/?utm_source=google&utm_medium=cpc&utm_campaign=FC:LEADS_KW:BRAND&utm_term=center%20covid%2019&gclid=Cj0KCQjw2tCGBhCLARIsABJGmZ7-z6ewWjf0Jlq2F24h--sBNRHJ1qu5RmFRiz_8EHksb74IQURjx9caApfWEALw_wc
html list type 在 Becca en el mundo //我的斜槓人生// Facebook 的最佳貼文
最近一段時間了,大家最關注的事之一想必是武漢肺炎,所以想跟大家分享以下一些資訊的整理,其實剛剛拍了一支直播的影片,之後有機會會再更新影片,資訊連結先分享給大家。
*COVID-19 現況:
article&utm_content=coronavirus&fbclid=IwAR0lxEpUgE6mShCYLqCHNOde9baE3h-L77fX9uRklNVY7ueOemDoxGmA5G8
English: https://www.worldometers.info/coronavirus/
中文:https://udn.com/news/story/120936/4299961
*疫情會持續到什麼時候:https://technews.tw/2020/02/05/wuhan-pneumonia-r0/
*目前旅遊狀況: https://www.facebook.com/131355730545650/photos/a.131360393878517/1108959592785254/?type=3&theater
*哪些地區不建議前往:https://www.boca.gov.tw/sp-trwa-list-1.html
*現在可不可以旅遊(英文,針對外國遊客,但是我們可以參考):https://theculturetrip.com/asia/china/articles/coronavirus-outbreak-and-travel-explained/?utm_source=instagram&utm_medium=social&utm_campaign=dash-
*疫情期間出入境管制(填寫健康聲明!):https://www.tripresso.com/blog/2020/02/%E6%AD%A6%E6%BC%A2%E8%82%BA%E7%82%8E/
https://lazyjapan.com/regions/taiwan/transport/airport/immigration.html
*自主管理?居家檢疫?居家隔離? https://ghsha.com/articles/366
*總結:
我覺得這波疫情,應該不要過度恐慌,也不要太過不擔心,盡量保持對資訊的敏感度跟注意個人衛生及健康,但是還是平常心過日子,因為至少現在我個人看來,整個市場經濟在2020前半年都會收到影響,雖然很辛苦,可能要共體時艱一段時間,但是我們一定會渡過這次的風波的!祈禱平安跟順利臨到台灣跟世界其他地區!❤️💪🏻❤️💪🏻❤️💪🏻
html list type 在 ヒカル(Hikaru) Youtube 的最讚貼文
■ReZARD beauty公式HP 定期(サブスクリプション)でのご購入はこちら
https://rezard.jp/beauty/
■@cosme SHOPPING でのご購入はこちら
https://www.cosme.com/campaign/group/2268/
■楽天でのご購入はこちら
https://item.rakuten.co.jp/cosmecomonline/1000142289/
■ReZARD beautyに関するよくある質問はこちら
https://rezard.jp/beauty/faq.html
<9/23原宿>でのお渡し会申込はこちら
https://passmarket.yahoo.co.jp/event/show/detail/02qbynjd0qw11.html
<9/25博多>でのお渡し会申込はこちら
https://passmarket.yahoo.co.jp/event/show/detail/02ufmj1wr4x11.html
<9/25大阪戎橋>でのお渡し会申込はこちら
https://passmarket.yahoo.co.jp/event/show/detail/021ffgat35x11.html
※お渡し会への参加は当日店舗にて、ご購入頂いた方に限ります。
各Webサイト上(ReZARD beauty公式HP/@cosme SHOPPING/楽天)でのご購入は、いずれもお渡し会への参加権利を得られるものではないのでご注意ください。
門りょうのチャンネルはこちら!
@門りょうチャンネル
このCMの裏側が見れます!
https://youtu.be/kViksYknIuA
ヒカルが愛用してる洋服ReZARDの購入はこちらから!
https://rezard.jp/
ReZARD×ロコンドの靴の購入はこちら!
https://www.locondo.jp/shop/contents/special-ReZARD_200402?top_special=hkr_2009
脱毛サロン(メンズ)予約URL
https://rejehanne.jp/lp/fb/04/
脱毛サロン(レディース)予約URL
https://rejehanne.jp/lp/fb/ladies01/
脱毛サロンのインスタURL
https://www.instagram.com/rejehanne_byhikaru/?hl=ja
脱毛サロンのツイッターURL
https://twitter.com/rejehanne
脱毛サロンの求人募集はこちら!
https://kirei-job.jp/index.php?app_controller=info&type=mid&id=J0000157
ヘッドスパサロンの予約はこちら
https://redoffy.jp/
★チャンネル登録はこちら
https://www.youtube.com/channel/UCaminwG9MTO4sLYeC3s6udA?sub_confirmation=1
「ReZARD」に関する情報は下のTwitterでお知らせします。
それとDM解放してるので質問などあればそこでお願いします。
https://twitter.com/Rezard_official
ヒカルの公式サイトはこちら
https://hikaruchannel.net/
★プレゼントや手紙の送り先はこちらになります!
〒100-0005 東京都千代田区丸の内 1-6-5
丸の内北口ビルディングWeWork 8階
株式会社サムライパートナーズ
Youtuberヒカル・ネクステ宛
※食べ物、動物、火薬物など、非衛生的、使用済、開封済、危険の伴うプレゼント、
ファンレターに送り主名の無き物は受付けておりません。
※送られた物に関しては、内容を確認させていただいた上で、運営の判断によりお渡しできない場合もございます。
曲をまとめて聞きたい方はこちらから!
https://www.youtube.com/watch?v=yrXuKm6JtYA&list=PLcxHm0kSGuEBGW8gmYNOM-2Ah1B9t6Gax
【ネクステのTwitterアカウント】
★ヒカルのTwitter
https://twitter.com/kinnpatuhikaru
★名人のTwitterはこちら
https://twitter.com/1chan_meijin
★ロケマサのTwitterはこちら
https://twitter.com/1chan_rokemasa
★相馬トランジスタのTwitterはこちら
https://twitter.com/SOMA_TRANSISTOR
★みっき〜のTwitterはこちら
https://twitter.com/_mky_mky
★おだけいのTwitterはこちら
https://twitter.com/keisuke_OK_8
★まえっさんのTwitterはこちら
https://twitter.com/1chan_maessan
★捧さんのTwitterはこちら
https://twitter.com/taku_michelle
★ヒカルの公式Twitterはこちら(動画通知、お知らせ等)
https://twitter.com/hikaru2nd1031
【ネクステのTikTokアカウント】
★ヒカルのTikTokはこちら
https://www.tiktok.com/@hikarukinnpatu
★みっき〜のTikTokはこちら
https://www.tiktok.com/@_mky_mky
★まえっさんのTikTokはこちら
https://www.tiktok.com/@maessann0918
【ネクステのInstagram】
★ヒカルのInstagram
https://www.instagram.com/tadanokarisuma/
★名人のInstagram
https://www.instagram.com/meijin_next/
★ロケマサのInstagram
https://www.instagram.com/rokemasa__/
★相馬トランジスタのInstagram
https://www.instagram.com/somatransistor/
★みっき〜のInstagram
https://www.instagram.com/_mky_mky/
★おだけいのInstagram
https://www.instagram.com/3odakeisuke1120/
★まえっさんのInstagram
https://www.instagram.com/maessann0918/
★捧さんのInstagram
https://www.instagram.com/sasage_hair/
★ReZARDの公式インスタグラム
https://www.instagram.com/rezard.official/
★ヒカルのゲーム実況チャンネル
https://www.youtube.com/user/kinnpatuhikaru
★ヒカルへの仕事のお問い合わせはこちら
info@hikaruchannel.net
マネージャー高橋のDMまでお願いします。
https://twitter.com/takahashisan69
★ヒカル買取鑑定団のURL
https://hikaru-kaitori.com
★ヒカル買取鑑定団のインスタ
https://instagram.com/hikaru__kaitori?utm_medium=copy_link
★ヒカル買取鑑定団の公式LINE
https://lin.ee/8IzsDk2
#ヒカル#門りょう
![post-title](https://i.ytimg.com/vi/fcc4cH5ZIRA/hqdefault.jpg)
html list type 在 ヒカル(Hikaru) Youtube 的最讚貼文
■ReZARD beautyに関するよくある質問はこちら
https://rezard.jp/beauty/faq.html
■ReZARD beauty公式HP 定期(サブスクリプション)でのご購入はこちら
https://rezard.jp/beauty/
■@cosme SHOPPING でのご購入はこちら
https://www.cosme.com/campaign/group/2268/
■楽天でのご購入はこちら
https://item.rakuten.co.jp/cosmecomonline/1000142289/
<9/23原宿>でのお渡し会申込はこちら
https://passmarket.yahoo.co.jp/event/show/detail/02qbynjd0qw11.html
<9/25博多>でのお渡し会申込はこちら
https://passmarket.yahoo.co.jp/event/show/detail/02ufmj1wr4x11.html
<9/25大阪戎橋>でのお渡し会申込はこちら
https://passmarket.yahoo.co.jp/event/show/detail/021ffgat35x11.html
※お渡し会の予約は9月20日21時から先着で行います。
※お渡し会への参加は当日店舗にて、ご購入頂いた方に限ります。
各Webサイト上(ReZARD beauty公式HP/@cosme SHOPPING/楽天)でのご購入は、いずれもお渡し会への参加権利を得られるものではないのでご注意ください。
ヒカルが愛用してる洋服ReZARDの購入はこちらから!
https://rezard.jp/
ReZARD×ロコンドの靴の購入はこちら!
https://www.locondo.jp/shop/contents/special-ReZARD_200402?top_special=hkr_2009
脱毛サロン(メンズ)予約URL
https://rejehanne.jp/lp/fb/04/
脱毛サロン(レディース)予約URL
https://rejehanne.jp/lp/fb/ladies01/
脱毛サロンのインスタURL
https://www.instagram.com/rejehanne_byhikaru/?hl=ja
脱毛サロンのツイッターURL
https://twitter.com/rejehanne
脱毛サロンの求人募集はこちら!
https://kirei-job.jp/index.php?app_controller=info&type=mid&id=J0000157
ヘッドスパサロンの予約はこちら
https://redoffy.jp/
★チャンネル登録はこちら
https://www.youtube.com/channel/UCaminwG9MTO4sLYeC3s6udA?sub_confirmation=1
「ReZARD」に関する情報は下のTwitterでお知らせします。
それとDM解放してるので質問などあればそこでお願いします。
https://twitter.com/Rezard_official
ヒカルの公式サイトはこちら
https://hikaruchannel.net/
★プレゼントや手紙の送り先はこちらになります!
〒100-0005 東京都千代田区丸の内 1-6-5
丸の内北口ビルディングWeWork 8階
株式会社サムライパートナーズ
Youtuberヒカル・ネクステ宛
※食べ物、動物、火薬物など、非衛生的、使用済、開封済、危険の伴うプレゼント、
ファンレターに送り主名の無き物は受付けておりません。
※送られた物に関しては、内容を確認させていただいた上で、運営の判断によりお渡しできない場合もございます。
曲をまとめて聞きたい方はこちらから!
https://www.youtube.com/watch?v=yrXuKm6JtYA&list=PLcxHm0kSGuEBGW8gmYNOM-2Ah1B9t6Gax
【ネクステのTwitterアカウント】
★ヒカルのTwitter
https://twitter.com/kinnpatuhikaru
★名人のTwitterはこちら
https://twitter.com/1chan_meijin
★ロケマサのTwitterはこちら
https://twitter.com/1chan_rokemasa
★相馬トランジスタのTwitterはこちら
https://twitter.com/SOMA_TRANSISTOR
★みっき〜のTwitterはこちら
https://twitter.com/_mky_mky
★おだけいのTwitterはこちら
https://twitter.com/keisuke_OK_8
★まえっさんのTwitterはこちら
https://twitter.com/1chan_maessan
★捧さんのTwitterはこちら
https://twitter.com/taku_michelle
★ヒカルの公式Twitterはこちら(動画通知、お知らせ等)
https://twitter.com/hikaru2nd1031
【ネクステのTikTokアカウント】
★ヒカルのTikTokはこちら
https://www.tiktok.com/@hikarukinnpatu
★みっき〜のTikTokはこちら
https://www.tiktok.com/@_mky_mky
★まえっさんのTikTokはこちら
https://www.tiktok.com/@maessann0918
【ネクステのInstagram】
★ヒカルのInstagram
https://www.instagram.com/tadanokarisuma/
★名人のInstagram
https://www.instagram.com/meijin_next/
★ロケマサのInstagram
https://www.instagram.com/rokemasa__/
★相馬トランジスタのInstagram
https://www.instagram.com/somatransistor/
★みっき〜のInstagram
https://www.instagram.com/_mky_mky/
★おだけいのInstagram
https://www.instagram.com/3odakeisuke1120/
★まえっさんのInstagram
https://www.instagram.com/maessann0918/
★捧さんのInstagram
https://www.instagram.com/sasage_hair/
★ReZARDの公式インスタグラム
https://www.instagram.com/rezard.official/
★ヒカルのゲーム実況チャンネル
https://www.youtube.com/user/kinnpatuhikaru
★ヒカルへの仕事のお問い合わせはこちら
info@hikaruchannel.net
マネージャー高橋のDMまでお願いします。
https://twitter.com/takahashisan69
★ヒカル買取鑑定団のURL
https://hikaru-kaitori.com
★ヒカル買取鑑定団のインスタ
https://instagram.com/hikaru__kaitori?utm_medium=copy_link
★ヒカル買取鑑定団の公式LINE
https://lin.ee/8IzsDk2
#ヒカル
![post-title](https://i.ytimg.com/vi/JsORj8VJEYU/hqdefault.jpg)
html list type 在 ヒカル(Hikaru) Youtube 的最佳解答
■ReZARD beauty公式HP 定期(サブスクリプション)でのご購入はこちら
https://rezard.jp/beauty/
■@cosme SHOPPING でのご購入はこちら
https://www.cosme.com/campaign/group/2268/
■楽天でのご購入はこちら
https://item.rakuten.co.jp/cosmecomonline/1000142289/
<9/23原宿>でのお渡し会申込はこちら
https://passmarket.yahoo.co.jp/event/show/detail/02qbynjd0qw11.html
<9/25博多>でのお渡し会申込はこちら
https://passmarket.yahoo.co.jp/event/show/detail/02ufmj1wr4x11.html
<9/25大阪戎橋>でのお渡し会申込はこちら
https://passmarket.yahoo.co.jp/event/show/detail/021ffgat35x11.html
※お渡し会への参加は当日店舗にて、ご購入頂いた方に限ります。
各Webサイト上(ReZARD beauty公式HP/@cosme SHOPPING/楽天)でのご購入は、いずれもお渡し会への参加権利を得られるものではないのでご注意ください。
門りょうのチャンネルはこちら!
@門りょうチャンネル
ヒカルが愛用してる洋服ReZARDの購入はこちらから!
https://rezard.jp/
ReZARD×ロコンドの靴の購入はこちら!
https://www.locondo.jp/shop/contents/special-ReZARD_200402?top_special=hkr_2009
脱毛サロン(メンズ)予約URL
https://rejehanne.jp/lp/fb/04/
脱毛サロン(レディース)予約URL
https://rejehanne.jp/lp/fb/ladies01/
脱毛サロンのインスタURL
https://www.instagram.com/rejehanne_byhikaru/?hl=ja
脱毛サロンのツイッターURL
https://twitter.com/rejehanne
脱毛サロンの求人募集はこちら!
https://kirei-job.jp/index.php?app_controller=info&type=mid&id=J0000157
ヘッドスパサロンの予約はこちら
https://redoffy.jp/
★チャンネル登録はこちら
https://www.youtube.com/channel/UCaminwG9MTO4sLYeC3s6udA?sub_confirmation=1
「ReZARD」に関する情報は下のTwitterでお知らせします。
それとDM解放してるので質問などあればそこでお願いします。
https://twitter.com/Rezard_official
ヒカルの公式サイトはこちら
https://hikaruchannel.net/
★プレゼントや手紙の送り先はこちらになります!
〒100-0005 東京都千代田区丸の内 1-6-5
丸の内北口ビルディングWeWork 8階
株式会社サムライパートナーズ
Youtuberヒカル・ネクステ宛
※食べ物、動物、火薬物など、非衛生的、使用済、開封済、危険の伴うプレゼント、
ファンレターに送り主名の無き物は受付けておりません。
※送られた物に関しては、内容を確認させていただいた上で、運営の判断によりお渡しできない場合もございます。
曲をまとめて聞きたい方はこちらから!
https://www.youtube.com/watch?v=yrXuKm6JtYA&list=PLcxHm0kSGuEBGW8gmYNOM-2Ah1B9t6Gax
【ネクステのTwitterアカウント】
★ヒカルのTwitter
https://twitter.com/kinnpatuhikaru
★名人のTwitterはこちら
https://twitter.com/1chan_meijin
★ロケマサのTwitterはこちら
https://twitter.com/1chan_rokemasa
★相馬トランジスタのTwitterはこちら
https://twitter.com/SOMA_TRANSISTOR
★みっき〜のTwitterはこちら
https://twitter.com/_mky_mky
★おだけいのTwitterはこちら
https://twitter.com/keisuke_OK_8
★まえっさんのTwitterはこちら
https://twitter.com/1chan_maessan
★捧さんのTwitterはこちら
https://twitter.com/taku_michelle
★ヒカルの公式Twitterはこちら(動画通知、お知らせ等)
https://twitter.com/hikaru2nd1031
【ネクステのTikTokアカウント】
★ヒカルのTikTokはこちら
https://www.tiktok.com/@hikarukinnpatu
★みっき〜のTikTokはこちら
https://www.tiktok.com/@_mky_mky
★まえっさんのTikTokはこちら
https://www.tiktok.com/@maessann0918
【ネクステのInstagram】
★ヒカルのInstagram
https://www.instagram.com/tadanokarisuma/
★名人のInstagram
https://www.instagram.com/meijin_next/
★ロケマサのInstagram
https://www.instagram.com/rokemasa__/
★相馬トランジスタのInstagram
https://www.instagram.com/somatransistor/
★みっき〜のInstagram
https://www.instagram.com/_mky_mky/
★おだけいのInstagram
https://www.instagram.com/3odakeisuke1120/
★まえっさんのInstagram
https://www.instagram.com/maessann0918/
★捧さんのInstagram
https://www.instagram.com/sasage_hair/
★ReZARDの公式インスタグラム
https://www.instagram.com/rezard.official/
★ヒカルのゲーム実況チャンネル
https://www.youtube.com/user/kinnpatuhikaru
★ヒカルへの仕事のお問い合わせはこちら
info@hikaruchannel.net
マネージャー高橋のDMまでお願いします。
https://twitter.com/takahashisan69
★ヒカル買取鑑定団のURL
https://hikaru-kaitori.com
★ヒカル買取鑑定団のインスタ
https://instagram.com/hikaru__kaitori?utm_medium=copy_link
★ヒカル買取鑑定団の公式LINE
https://lin.ee/8IzsDk2
#ヒカル#門りょう
![post-title](https://i.ytimg.com/vi/kViksYknIuA/hqdefault.jpg)
html list type 在 YouTube Embedded Players and Player Parameters - Google ... 的推薦與評價
Overview
This document explains how to embed a YouTube player in your application and also defines the parameters that are available in the YouTube embedded player.
By appending parameters to the IFrame URL, you can customize the playback experience in your application. For example, you can automatically play videos using the autoplay
parameter or cause a video to play repeatedly using the loop
parameter. You can also use the enablejsapi
parameter to enable the player to be controlled via the IFrame Player API.
This page currently defines all parameters supported in any YouTube embedded player. Each parameter definition identifies the players that support the corresponding parameter.
Note: Embedded players must have a viewport that is at least 200px by 200px. If the player displays controls, it must be large enough to fully display the controls without shrinking the viewport below the minimum size. We recommend 16:9 players be at least 480 pixels wide and 270 pixels tall.
Embed a YouTube playerYou can use any of the following methods to embed a YouTube player in your application and specify player parameters. Note that the instructions below demonstrate how to embed a player that loads a single video. The following section explains how to configure your player to load a playlist or a user's uploaded videos.
Embed a player using an<iframe>
tagDefine an <iframe>
tag in your application in which the src
URL specifies the content that the player will load as well as any other player parameters you want to set. The <iframe>
tag's height
and width
parameters specify the dimensions of the player.
If you create the <iframe>
element yourself (rather than using the IFrame Player API to create it), you can append player parameters directly to the end of the URL. The URL has the following format:
https://www.youtube.com/embed/VIDEO_ID
The <iframe>
tag below would load a 640x360px player that would play the YouTube video M7lc1UVf-VE
. Since the URL sets the autoplay
parameter to 1
, the video would play automatically once the player has loaded.
Embed a player using the IFrame Player API
<iframe id="ytplayer" type="text/html" width="640" height="360"
src="https://www.youtube.com/embed/M7lc1UVf-VE?autoplay=1&origin=http://example.com"
frameborder="0"></iframe>
Follow the IFrame Player API instructions to insert a video player in your web page or application after the Player API's JavaScript code has loaded. The second parameter in the constructor for the video player is an object that specifies player options. Within that object, the playerVars
property identifies player parameters.
The HTML and JavaScript code below shows a simple example that inserts a YouTube player into the page element that has an id
value of ytplayer
. The onYouTubePlayerAPIReady()
function specified here is called automatically when the IFrame Player API code has loaded. This code does not define any player parameters and also does not define other event handlers.
Select content to play
<div id="ytplayer"></div><script>
// Load the IFrame Player API code asynchronously.
var tag = document.createElement('script');
tag.src = "https://www.youtube.com/player_api";
var firstScriptTag = document.getElementsByTagName('script')[0];
firstScriptTag.parentNode.insertBefore(tag, firstScriptTag); // Replace the 'ytplayer' element with an <iframe> and
// YouTube player after the API code downloads.
var player;
function onYouTubePlayerAPIReady() {
player = new YT.Player('ytplayer', {
height: '360',
width: '640',
videoId: 'M7lc1UVf-VE'
});
}
</script>
You can configure your embedded player to load a video, a playlist, or a user's uploaded videos.
The following list explains these options:
Loading a video
For an IFrame embed, the YouTube video ID for the video that you want to load is specified in the IFrame's src
URL.
https://www.youtube.com/embed/VIDEO_ID
If you are using the YouTube Data API (v3), you can programmatically construct these URLs by retrieving video IDs from search results, playlist item resources, video resources, or other resources. After obtaining a video ID, replace the VIDEO_ID
text in the URLs above with that value to create the player URL.
Loading a playlist
Set the listType
player parameter to playlist
. In addition, set the list
player parameter to the YouTube playlist ID that you want to load.
https://www.youtube.com/embed?listType=playlist&list=PLAYLIST_ID
Note that you need to prepend the playlist ID with the letters PL
as shown in the following example:
https://www.youtube.com/embed?listType=playlist&list=PLC77007E23FF423C6
If you are using the YouTube Data API (v3), you can programmatically construct these URLs by retrieving playlist IDs from search results, channel resources, or activity resources. After obtaining a playlist ID, replace the PLAYLIST_ID
text in the URL above with that value.
Loading a user's uploaded videos
Set the listType
player parameter to user_uploads
. In addition, set the list
player parameter to the YouTube username whose uploaded videos you want to load.
https://www.youtube.com/embed?listType=user_uploads&list=USERNAME
Supported parameters
All of the following parameters are optional.
Parameters
autoplay
This parameter specifies whether the initial video will automatically start to play when the player loads. Supported values are
0
or 1
. The default value is 0
.If you enable Autoplay, playback will occur without any user interaction with the player;
playback data collection and sharing will therefore occur upon page load.
cc_lang_pref
This parameter specifies the default language that the player will use to display captions. Set the parameter's value to an ISO 639-1 two-letter language code.
If you use this parameter and also set the
cc_load_policy
parameter to 1
, then the player will show captions in the specified language when the player loads. If you do not also set the cc_load_policy
parameter, then captions will not display by default, but will display in the specified language if the user opts to turn captions on.cc_load_policy
Setting the parameter's value to
1
causes closed captions to be shown by default, even if the user has turned captions off. The default behavior is based on user preference.color
This parameter specifies the color that will be used in the player's video progress bar to highlight the amount of the video that the viewer has already seen. Valid parameter values are
red
and white
, and, by default, the player uses the color red in the video progress bar. See the YouTube API blog for more information about color options.controls
This parameter indicates whether the video player controls are displayed:
controls=0
– Player controls do not display in the player.
controls=1
(default) – Player controls display in the player.
disablekb
Setting the parameter's value to
1
causes the player to not respond to keyboard controls. The default value is 0
, which means that keyboard controls are enabled. Currently supported keyboard controls are:
Spacebar or [k]: Play / Pause
Arrow Left: Jump back 5 seconds in the current video
Arrow Right: Jump ahead 5 seconds in the current video
Arrow Up: Volume up
Arrow Down: Volume Down
[f]: Toggle full-screen display
[j]: Jump back 10 seconds in the current video
[l]: Jump ahead 10 seconds in the current video
[m]: Mute or unmute the video
[0-9]: Jump to a point in the video. 0
jumps to the beginning of the video, 1
jumps to the point 10% into the video, 2
jumps to the point 20% into the video, and so forth.
enablejsapi
Setting the parameter's value to
1
enables the player to be controlled via IFrame Player API calls. The default value is 0
, which means that the player cannot be controlled using that API.For more information on the IFrame API and how to use it, see the IFrame API documentation.
end
This parameter specifies the time, measured in seconds from the start of the video, when the player should stop playing the video. The parameter value is a positive integer.
Note that the time is measured from the beginning of the video and not from either the value of the
start
player parameter or the startSeconds
parameter, which is used in YouTube Player API functions for loading or queueing a video.fs
Setting this parameter to
0
prevents the fullscreen button from displaying in the player. The default value is 1
, which causes the fullscreen button to display.hl
Sets the player's interface language. The parameter value is an ISO 639-1 two-letter language code or a fully specified locale. For example,
fr
and fr-ca
are both valid values. Other language input codes, such as IETF language tags (BCP 47) might also be handled properly.The interface language is used for tooltips in the player and also affects the default caption track. Note that YouTube might select a different caption track language for a particular user based on the user's individual language preferences and the availability of caption tracks.
iv_load_policy
Setting the parameter's value to
1
causes video annotations to be shown by default, whereas setting to 3
causes video annotations to not be shown by default. The default value is 1
.list
The
list
parameter, in conjunction with the listType
parameter, identifies the content that will load in the player.
If the listType
parameter value is user_uploads
, then the list
parameter value identifies the YouTube channel whose uploaded videos will be loaded.
If the listType
parameter value is playlist
, then the list
parameter value specifies a YouTube playlist ID. In the parameter value, you need to prepend the playlist ID with the letters PL
as shown in the example below.
https://www.youtube.com/embed?
listType=playlist
&list=PLC77007E23FF423C6
If the
listType
parameter value is search
, then the list
parameter value specifies the search query. Note: This functionality is deprecated and will no longer be supported as of 15 November 2020.Note: If you specify values for the
list
and listType
parameters, the IFrame embed URL does not need to specify a video ID.listType
The
listType
parameter, in conjunction with the list
parameter, identifies the content that will load in the player. Valid parameter values are playlist
and user_uploads
.If you specify values for the
list
and listType
parameters, the IFrame embed URL does not need to specify a video ID.Note: A third parameter value,
search
, has been deprecated and will no longer be supported as of 15 November 2020.loop
In the case of a single video player, a setting of
1
causes the player to play the initial video again and again. In the case of a playlist
player (or custom player), the player plays the entire playlist and then starts again at the
first video.
Supported values are
0
and1
, and the default value is0
.Note: This parameter has limited
support in IFrame embeds. To loop a single video, set the
loop
parameter value to 1
and set the
playlist
parametervalue to the same video ID already specified in the Player API URL:
https://www.youtube.com/embed/VIDEO_ID?playlist=VIDEO_ID&loop=1
modestbranding
Note: This parameter is deprecated and has no effect. See the deprecation announcement for more information.
origin
This parameter provides an extra security measure for the IFrame API and is only supported for IFrame embeds. If you are using the IFrame API, which means you are setting the
enablejsapi
parameter value to 1
, you should always specify your domain as the origin
parameter value.playlist
This parameter specifies a comma-separated list of video IDs to play. If you specify a value, the first video that plays will be the
VIDEO_ID
specified in the URL path, and the videos specified in the playlist
parameter will play thereafter.playsinline
This parameter controls whether videos play inline or fullscreen on iOS. Valid values are:
0
: Results in fullscreen playback. This is currently the default value, though the default is subject to change.
1
: Results in inline playback for mobile browsers and for WebViews
created with the allowsInlineMediaPlayback
property set to YES
.
rel
Note: This parameter is changing on or after September 25, 2018.
Prior to the change, this parameter indicates whether the player should show related videos when playback of the initial video ends.
If the parameter's value is set to 1
, which is the default value, then the player does show related videos.
If the parameter's value is set to 0
, then the player does not show related videos.
After the change, you will not be able to disable related videos. Instead, if the rel
parameter is set to 0
, related videos will come from the same channel as the video that was just played.
start
This parameter causes the player to begin playing the video at the given number of seconds from the start of the video. The parameter value is a positive integer. Note that similar to the seekTo
function, the player will look for the closest keyframe to the time you specify. This means that sometimes the play head may seek to just before the requested time, usually no more than around two seconds.
widget_referrer
This parameter identifies the URL where the player is embedded. This value is used in YouTube Analytics reporting when the YouTube player is embedded in a widget, and that widget is then embedded in a web page or application. In that scenario, the origin
parameter identifies the widget provider's domain, but YouTube Analytics should not identify the widget provider as the actual traffic source. Instead, YouTube Analytics uses the widget_referrer
parameter value to identify the domain associated with the traffic source.
Revision history
August 15, 2023
Note: This is a deprecation announcement for the
modestbranding
parameter.
The modestbranding
parameter is deprecated and will
have no effect. To align with YouTube's branding requirements, the player now determines the
appropriate branding treatment based on a combination of factors, including player size, other API
parameters (e.g. controls
), and additional signals.
April 27, 2021
The playsinline
parameter definition has been updated
slightly to explain that the parameter pertains to both mobile browsers on iOS and iOS
WebViews.
October 15, 2020
The autoplay
parameter definition has been updated to
explain that if you enable Autoplay, playback will occur without any user interaction with the
player; playback data collection and sharing will therefore occur upon page load.
October 13, 2020
Note: This is a deprecation announcement for the embedded player
functionality that lets you configure the player to load search results. This announcement affects
the player's list
and
listType
parameters.
This change will become effective on or after 15 November 2020. After that time,
setting the listType
parameter value to search
will generate a
4xx
response code, such as 404
(Not Found
) or
410
(Gone
).
As an alternative, you can use the YouTube Data API's
search.list
method to retrieve search
results and then load selected videos in the player.
In addition to the change described above, the showinfo
parameter, which was
deprecated in 2018, has been removed from this document.
August 23, 2018
Note: This is a deprecation announcement for the showinfo
parameter. In addition, the behavior for the rel
parameter is changing. Titles, channel information, and related videos are an important part of YouTube’s core user experience, and these changes help to make the YouTube viewing experience consistent across different platforms.
The behavior for the
rel
parameter is changing on or after September 25, 2018. The effect of the change is that you will not be able to disable related videos. However, you will have the option of specifying that the related videos shown in the player should be from the same channel as the video that was just played.To be more specific:
Prior to the change, if the parameter's value is set to
0
, then the player does not show related videos.After the change, if the
rel
parameter is set to 0
, the player will show related videos that are from the same channel as the video that was just played.The
showinfo
parameter, which indicates whether the player should display information like the video title and uploader before the video starts playing, is also being deprecated. Following the change, the channel avatar and video title will always display before playback begins, when playback is paused, and when playback ends. The avatar being displayed is new behavior that will be consistent across all embedded players.These changes will become effective on or after September 25, 2018. After that time, the showinfo
parameter will be ignored. The behavior following the changes is consistent with the current default behavior for embedded players with the exception of the channel avatar changes mentioned above.
August 16, 2018
The cc_lang_pref
parameter can be used to specify the default language that the player will use to display captions. This parameter can be used in conjunction with the cc_load_policy
parameter to automatically show captions in the specified language during playback.
September 15, 2017
The controls
parameter's definition has been updated to remove references to the deprecated Flash (AS3) player. The value 2
has been deprecated as it was originally designed to provide a performance improvement for embeds that loaded a Flash player.
June 12, 2017
The new widget_referrer
parameter helps to enable more accurate YouTube Analytics reporting when the YouTube player is embedded in a widget, and that widget is then embedded in a web page or application.
November 1, 2016
This document has been updated to remove references to the deprecated Flash (AS3) player as well as to parameters only supported by that player. The YouTube Flash player was deprecated in January 2015.
October 20, 2016
This update contains the following changes:
The disablekb
parameter definition has been corrected to note that the default value is 0
, which means that keyboard controls are enabled. A value of 1
indicates that keyboard controls should be disabled.
The list of keyboard controls that the player supports has also been updated to include the following:
[f]: Toggle full-screen display
[j]: Jump back 10 seconds in the current video
[k]: Play / Pause
[l]: Jump ahead 10 seconds in the current video
[m]: Mute or unmute the video
[0-9]: Jump to a point in the video.
0
jumps to the beginning of the video, 1
jumps to the time 10% into the video, 2
jumps to the point 20% into the video, and so forth.In addition, the effect of pressing the [arrow left] or [arrow right] keys has changed. These keys now jump 5 seconds back (arrow left) or ahead (arrow right) in the current video.
August 11, 2016
This update contains the following changes:
The newly published YouTube API Services Terms of Service ("the Updated Terms"), discussed in detail on the YouTube Engineering and Developers Blog, provides a rich set of updates to the current Terms of Service. In addition to the Updated Terms, which will go into effect as of February 10, 2017, this update includes several supporting documents to help explain the policies that developers must follow.
The full set of new documents is described in the revision history for the Updated Terms. In addition, future changes to the Updated Terms or to those supporting documents will also be explained in that revision history. You can subscribe to an RSS feed listing changes in that revision history from a link in that document.
December 18, 2015
European Union (EU) laws require that certain disclosures must be given to and consents obtained from end users in the EU. Therefore, for end users in the European Union, you must comply with the EU User Consent Policy. We have added a notice of this requirement in our YouTube API Terms of Service.
August 19, 2015
The autohide
parameter has been deprecated for the HTML5 player. In HTML5 players, the video progress bar and player controls display or hide automatically. That behavior corresponds to an autohide
setting of 1
.
The theme
parameter has been deprecated for the HTML5 player. HTML5 players now always use the dark theme.
March 9, 2015
The document has been updated to reflect the fact that YouTube <object>
embeds, the YouTube Flash Player API and the YouTube JavaScript Player API have all been deprecated as of January 27, 2015. A deprecation warning appears in several sections of this document to help point readers to the IFrame Player API as an alternative.
The definition of the autohide
parameter has been updated to clarify the meaning of the parameter's values. The default behavior (autohide=2
) is that if the player has a 16:9 or 4:3 aspect ratio, the player's video progress bar and player controls display or hide automatically. Otherwise, those controls are visible throughout the video.
The definition of the hl
parameter has been updated to note that the parameter value could be an ISO 639-1 two-letter language code or a fully specified locale. For example, fr
and fr-ca
are both valid parameter values.
The definition of the enablejsapi
parameter has been reworded to clarify that the parameter enables a player to be controlled via API calls. The API could be either the IFrame Player API or the JavaScript Player API.
October 14, 2014
The HTML5 player now supports the cc_load_policy
, disablekb
, end
, fs
, list
, and listType
parameters. The parameter descriptions have been updated accordingly.
July 18, 2014
The new hl
parameter can be used to set the player's interface language. The interface language is used for tooltips in the player and also affects the default caption track. The selected caption track may also depend on the availability of caption tracks and user's individual language preferences.
The parameter's value is an ISO 639-1 two-letter language code, though other language input codes, such as IETF language tags (BCP 47) may also be handled properly.
The definition of the playsinline
parameter, which only affects HTML5 players on iOS, has been modified slightly. The definition now notes that setting the parameter value to 1
causes inline playback only for UIWebViews
created with the allowsInlineMediaPlayback
property set to TRUE
.
January 28, 2014
The playsinline
parameter controls whether videos play inline or fullscreen in an HTML5 player on iOS. Setting the value to 1
causes inline playback.
The Selecting content to play section has been updated to explain how to find YouTube video IDs and playlist IDs using the YouTube Data API (v3) rather than the older API version.
The controls
parameter's definition has been updated to reflect the fact that the parameter value only affects the time that the Flash player actually loads in IFrame embeds. In addition, for IFrame embeds, the parameter value also determines when the controls display in the player. If you set the parameter's value to 2
, then the controls display and the Flash player loads after the user initiates the video playback.
May 10, 2013
This update contains the following changes:
YouTube no longer identifies experimental API features and services. Instead, we now provide a list of YouTube APIs that are subject to the deprecation policy.
July 20, 2012
This update contains the following changes:
The definition of the controls
parameter has been updated to reflect support for a parameter value of 2
and to explain that, for AS3 players, the parameter value determines the time when the Flash player actually loads. If the controls
parameter is set to 0
or 1
, the Flash player loads immediately. If the parameter value is 2
, the Flash player does not load until the video playback is initiated.
June 5, 2012
This update contains the following changes:
The HTML5 player now supports the color
, modestbranding
, and rel
parameters, and the definitions for these parameters have been updated accordingly.
The definition of the showinfo
parameter has been updated to explain how that if the player is loading a playlist, and you explicitly set the parameter value to 1
, then, upon loading, the player will also display thumbnail images for the videos in the playlist. Note that this functionality is only supported for the AS3 player since that is the only player that can load a playlist.
May 4, 2012
This update contains the following changes:
The showinfo
parameter's definition has been updated to reflect the fact that the HTML5 player supports this parameter.
May 3, 2012
This update contains the following changes:
The new end
parameter specifies the time, measured in seconds from the start of the video, when the player should stop playing a video. Note that the time when playback is stopped is measured from the beginning of the video and not from the value of either the start
player parameter or the startSeconds
parameter, which is used in YouTube Player API functions for loading or queueing a video.
March 29, 2012
This update contains the following changes:
The new Embedding a YouTube player section explains different ways to embed a YouTube player in your application. This section covers manual IFrame embeds, IFrame embeds that use the IFrame Player API, and AS3 and AS2 object embeds. This section incorporates information from the old Example usage section, which has been removed.
The new Selecting content to play section explains how to configure the player to load a video, a playlist, search results for a specified query, or uploaded videos for a specified user.
The new list
and listType
parameters let you specify the content that the player should load. You can specify a playlist, a search query, or a particular user's uploaded videos.
The definitions of the fs
and rel
parameters have been updated to more clearly explain the default parameter values for the AS3 player.
The border
, color1
, egm
, hd
, and showsearch
parameters, which are all only supported for the deprecated AS2 Player API, have been moved to a new section named deprecated parameters only used in the AS2 Player API.
The document no longer provides a way to filter the parameter list to only display parameters supported in either the AS3, AS2, or HTML5 player. Instead, each parameter definition has been updated to identify the players that support that parameter.
August 11, 2011
This update contains the following changes:
The new theme
and color
parameters let you customize the appearance of the embedded player's player controls. See the YouTube API blog for more information.
June 8, 2011
This update contains the following changes:
The new modestbranding
parameter lets you use a YouTube player that does not show a YouTube logo. As of this release, the parameter was only supported for the AS3 embedded player and for IFrame embeds that loaded the AS3 player. As of June 5, 2012, the HTML5 player also supported this parameter.
February 14, 2011
This update contains the following changes:
The documentation has been updated to note that the AS2 Player API has been deprecated. The deprecation of the AS2 Player API was actually announced on October 14, 2009.
February 3, 2011
This update contains the following changes:
The documentation has been updated to identify parameters supported in the HTML5 (IFrame) embedded player.
The document now displays all of the parameters supported in any of YouTube's embedded players (HTML5, AS3, AS2).
The following parameters are supported in the AS2 player but have been deprecated for the newer AS3 and HTML5 players: border
, color1
, color2
, egm
, hd
, and showsearch
.
In addition, the loop
parameter has limited support in the AS3 player and in IFrame embeds, which could load either an AS3 or HTML player. Currently, the loop
parameter only works in the AS3 player when used in conjunction with the playlist
parameter. To loop a single video, set the loop
parameter to 1
and set the playlist
parameter value to the same video ID already specified in the Player API URL:
https://www.youtube.com/v/VIDEO_ID?version=3&loop=1&playlist=VIDEO_ID
Similarly, the controls
and playlist
parameters are supported in the AS3 and HTML5 players but are not and will not be supported in the AS2 player.
As noted above, IFrame embeds can load either an AS3 or HTML5 player. Though some parameters are not supported in both players, an IFrame embed that loads the AS3 player will support all parameters that work with that player and ignore all other parameters. Similarly, an IFrame embed that loads the HTML5 player will support all parameters that work with that player while ignoring all other parameters.
The parameter list has been updated to include the autohide
parameter, which indicates whether the player's video controls will automatically hide after a video begins playing.
The parameter list has been updated to include the controls
parameter, which indicates whether the player's video controls will display at all. (Player controls do display by default.)
The parameter list has been updated to include the playlist
parameter, which specifies a comma-separated list of video IDs to play.
The definition of the fs
has been updated to note that the fullscreen option will not work if you load the YouTube player into another SWF.
The example at the end of the document has been updated to use the embedded AS3 player instead of the embedded AS2 player. The parameters used in the example have also been updated to only include parameters that the AS3 player supports.
In addition, the instructions for constructing the URLs that contain player parameters have been updated to reflect the URL formats used by the AS3 and AS2 embedded and chromeless players as well as by the HTML5 player.
... <看更多>
html list type 在 CSS Tutorial 65 - CSS list-style-type Property | HTML ul tag 的推薦與評價
CSS Tutorial 65 - CSS list-style-type Property | HTML ul ... link for next video: CSS Tutorial 66 - CSS list ... ... <看更多>